GTU Paper Solution For Mobile Computing Free Download

Solution of GTU-PAPERS

Unit -1: Mobile Computing Introduction 

11. What are three ways of content and behaviour adaptation? Mention various types of context information used for content adaptation.                                 (May 2013)

The mobile computing environment must be context independent as well as context sensitive. Context information is the information related to surrounding of the actor in that environment.

All the information that helps to determine the state of the object is called context. The context data is captured so that decisions can be made about how to adapt content or behavior to suit this context. The content and behavior of applications should be adapted to suit the current situation.

The following are the three ways of content and behavior adaptation.

1) Content with context awareness

There are different services for different client context.

For example: if a bank decides to provide mobile banking applications through internet, PDA and mobile phones using WAP then the services are http://mybank.com/inet.html, http://mybank.com/palm.html and  http://mybank.com/wap.wml respectively.

http://mybank.com/inet.html will assume that user is using computers to access this service. So it offers big pages with text boxes and drop down menus. It may also contain high resolution pictures and animations.

http://mybank.com/palm.html is a service for palmOS PDA. As the display size is small, screen size should be compact and no high resolution images or animations should be displayed.

http://mybank.com/wap.wml is for mobile phones so the drop down options available will be replaced by option button and all graphics and animations are removed.

2) Content switch on context

 In this case, the service is same for internet, PDA and WAP. All access banking services through http://mybank.com/. The code identifies the agent to decide what type of device or context it is. This intelligent code does the adaptation at run time based upon the agent. Agent will decide whether to route the request to http://mybank.com/inet.html, http://mybank.com/palm.html or http://mybank.com/wap.wml

3) Content transcoding on context

Other way is performing adaptation of content based on the context and behavior of the device. This adaption happens transparent to the client and application. The middle ware is intelligent to identify the context either from the http parameters or additional customized parameters. In this case the service may be in html or xml, the middleware platform transcode the code from html to wml.

2.  Explain three tier architecture of Mobile Computing. (May 2013, june 2012, dec 2012)        

Presentation tier

•       User facing system

•      Runs on client’s device

•      Offers all user interface

•      Present the information to the user

•      Mozilla, IE, NN, customized client programs, applet running on browser

Application tier

•      Behaves as engine of application

•      Processes input, obtaining data and making decisions

•      Presentation and database independent

•      Java, JSP, .NET, PHP, ColdFusion

•      Functions other then business logic are network management, security, database access

•      Middleware

•      Software between user interface and operating system

•      Types of middleware

Database tier

3     3. Explain difference between 1^st , 2^nd and 3^rd generation of wireless network networks (june 2012)

1^st generation

Analog technology

Introduced in 80’s in UK by Vodafone

Operates on

a.      Frequency division multiple access (FDMA)

b.      900MHz frequency range

Breaks up the available frequency into 30 KHz channels

            • Allocates a single channel to each phone call

            • The channel is agreed with the Base station before transmission takes place on agreed and reserved channel

            • The device can then transmit on this channel

                        – No other device can share this channel

                        – A different channel is required to receive

As the communication is analog, large data is need to be transmitted.

•      Poor voice quality

•      Poor battery life

•      Large phone size

•      No security

•      Frequent call drops

•      Poor handoffs

2^nd generation

•      2G networks are digital

•      Operates on

–     TDMA

–     CDMA

•      Speech compression

Improved security

•      GSM was primary service provided by 2G

•      Initially data rate limited to 9.6 Kbps

•      Then enhanced to 57.6 Kbps

•      Applications

–     Text and SMS

–     Internet on mobile

3^rd generation

•      Wide range of advanced services

•      Vision of 3G technology

–     Global roaming

–     Multimedia (voice, data and video)

–     Increased data rates

–     384 kbps while moving

–     2 Mbps when stationary at specific locations

–     Phone calls/ fax

–     Global roaming

–     Send/receive large email messages

–     High speed web

–     Navigation / maps

–     Video conferencing

–     TV streaming

–     Speed: 200 kb/sec-2mb/sec

Limitations

Challenge to build necessary infrastructure for 3G

Expense of 3G

44.     Explain TDMA, FDMA, CDMA, SDMA (june 2012, nov 2011)

•      Radio channel is shared by multiple users.

•      Need to provide and control simultaneous access

•      Avoid collision

•      Fixed or predetermined allocation of channel resources

•      Dynamic allocation

•      FDMA – single band, single user

•      TDMA – single band, multiple time slots

               Single time slot, single user

•      CDMA – same band, same time slot, multiple users

Explanation is given in above answer.

Unit -2: Mobile Technologies 

55.     How does a new Bluetooth device discover a Bluetooth network? Describe the security principles in Bluetooth. (May 2013,dec 2012)

•      Operates at 2.4 GHz (2400 -2480MHz) ISM frequency band

–     Unlicensed

•      79 channels spaced 1MHz apart from 2.402 GHz to 2.480GHz

•      Power levels

–     1mW  covering 10cm to 100mW covering 100meters

•      Unicast as well as multicast

•      Follows master – slave architecture

•      Slave has to wait till master allows them

•      Each terminal can be either M or S

•      One M is master of maximum 7 S

•      One S can be member of other piconet too

•      SB – not getting access

•      P – low power mode

•      M –laptop

•      S – mouse, keyboard, printer, projector

Multiple piconet

At least one S in other piconet 

•      When two Bluetooth devices are brought into each other’s range they will notice each other and make a connection.

•      Known as “paging”. Each device will send “I am here” message regularly within its range.

•      Once they do hit on a common frequency, the device that “found” other device becomes a master and the other becomes a slave

Security parameters

•      Operates in 3 modes

–     Mode 1

•      No security

•      No use of Encryption algorithms

–     Mode 2

•      Use encryption for communication with specific devices but not for broadcast messages

–     Mode 3

•      Uses encryption for all data/devices

66.    Explain GSM architecture ( may 2013 )  

•      GSM network divided into four groups

–     Mobile station (MS)

•      Mobile equipment (ME)

•      Subscriber identity module (SIM)

–     Base station subsystem (BSS)

•      BTS

•      BSC

–     Network and switching subsystem (NSS)

•      MSC

•      Home location register (HLR)

•      Visitor location register (VLR)

•      Equipment identity register (EIR)

•      Authentication center (AUC)

–     Operation and support subsystem (OSS)

•      Operation maintenance center (OMC)

Mobile station

•      Mobile or cellular phone

•      Two main element

–     ME

–     SIM

•      Without SIM, terminal is not operational

•      SIM contains IMSI – international mobile subscriber identity

–     Unique and secret key for the authentication 

BSS

•      BSS connects MS and NSS

•      Two parts

–     BTS

–     BSC

•      BTS- Transreceiver and antennas

•      Large urban area contains large number of BTS deployed in it

•      Power of BTS and number of user, defines the size of cell

•      BSC provides connection between BTS and MSC

•      Manages the radio resources for one or more BTS

•      Handles handover, radio- channel setup, controlling radio frequency, power level of BTS, frequency hopping

NSS

•      Responsible for network operation

•      Provides communication with other wired and wireless devices

•      Switch that communicates with other switches and provide support functionalities to cellular environment

•      MSC with HLR and VLR, provides the call routing and roaming capabilities

•      HLR stores information of subscribers belonging to the covering area of MSC

•      HLR contains all administrative information

•      Address

•      Service type

•      Current location

•      Billing information

•      Authentication/ cipher keys

•      Roaming is enabled or not

•      Auxiliary services like voice mail

•      International calls allowed or not

•      Pointer to VLR

•      Power off status of ME

•      HLR is fixed and stored in home network

•      VLR moves with the subscriber

•      Assigns  TMSI to MS

•      VLR can be considered as temporary copy of some important information stored in HLR

•      VLR is similar to cache, HLR is persistent storage

•      When a MS enters the covering area of a new MSC, the VLR associated with this MSC will request information about it from HLR

•      GMSC (gateway MSC)

•      Node interconnecting two networks

•      Interface between cellular network and PSTN (public switched telephone network )

•      Call routing from fixed to GSM network and vive versa

•      GIMSC (GSM interworking unit )

•      Interface to various networks of data communications

•      AUC

•      Different algorithms used for authentication of ME

•      Different classes of SIM have different algorithms

•      Stores the secret key

•      Verify the user’s identity

•      EIR

•      List of all valid mobile equipment in network

•      Each ME identified by IMEI

•      IMEI marked as invalid, if its not approved or stolen 

•      Prevents the call from unauthorized terminal

OSS

•      Controls and monitors the GSM system

•      Controls the traffic load of BSS

•      Main functions

–     Maintain all hard ware’s and network operation

–     Manage charging and billing procedure

77.    List various handoffs carried out in GSM and explain them (dec 2012, dec 2011)

Handover 

Internal ( involve one BSC)

Channels (time , frequency slots) in same cells

Cells (BTS) under control of same BSC

External (handled by MSC)

Cells under control of different BSCs, but belongs to same MSC

Cells under control of different MSC

Hard handover

Soft handover 

•      Inter cell handover

•      Inter MSC handover

•      Inter BSC handover

•      Inter BSC, Inter MSC handover

•      Intra cell

•      Inter cell, intra BSC

•      Inter cell, intra MSC 

88.     Explain mobility management, call routing and roaming in GSM (july 2012)

UMTS and GSM are each made up of separate cells (base stations) that cover a specific geographical area. All base stations are integrated into one area, allowing a cellular network to cover a wider area (location area).

The location update procedure allows a mobile device to notify a cellular network when shifting between areas. When a mobile device recognizes that an area code differs from a previous update, the mobile device executes a location update, by sending a location request to its network, prior location and specific Temporary Mobile Subscriber Identity (TMSI). A mobile device provides updated network location information for several reasons, including reselecting cell location coverage due to a faded signal.

Location area includes a group of base stations assembled collectively to optimize signalling. Base stations are integrated to form a single network area known as a base station controller (BSC). The BSC manages allocation of radio channels, acquires measurements from cell phones, and handles handovers from one base station to another.

Roaming is among the basic procedures of mobility management. It enables subscribers to use mobile services when moving outside of the geographical area of a specific network.

99)     Explain RFID (nov 2011 ) explain active and passive RFID with applications of each (dec 2012)

•      Uses radio-frequency waves to transfer data between a reader and item to identify, categorize, track.

•      Entity in manufacturing

•      Goods in transit

•      Items in retail store

•      Vehicle in parking area

•      Tracking animals

•      Books in library

•      Does not require physical sight or contact.

•      Transponder is a device that emits an identifying signal in response to an interrogating received signal.

•      RFID is a transponder(tags) carrying an ID that can be read through radio interfaces.

•      RFID Tags are attached to the object

 

•      Active

–     Powered by internal battery

–     Read/write

–     Higher storage facility

–     Memory from few bytes to 1 MB

–     Greater cost and limited operational life

–     Longer read range

•      Passive

–     Do not require power – Draws from antenna

–     Lower storage capacities (few bits to 1 KB)

–     Shorter read ranges

–     Usually Write-Once-Read-Many/Read-Only tags

–     Cheaper

–     High operational life time

110) What are the limitations of traditional IP? How mobile IP works? (june 2012, dec 2012)

•      IP assumes end hosts are fixed

–     What if they move between networks

•      IP address enables routing algorithms to send packets to correct network

•      What if a user wants to roam between network

–     Mobile users don’t want to know that they are moving between networks

•      Data connection between two end points requires a source IP, source TCP port, target IP, target TCP port

•      TCP port is application specific and remains constant

•      IP address is network specific

•      Mobile node moves from one subnet to other, so IP will also change and connection will terminate

Working of IP

•      IP address of node

–     Network address

–     Node address

•      Network address used by routers to deliver packets the router of that particular network

•      Node address is used by router to send that packet to the node

•      IP changes when node moves from one subnet to other

•      Conventional IP is not feasible

•      Solution – two IP address

–     Home  address

–     Care -of address

•      Mobile node (MN)

–     Change point of attachment from one network to other

•      Home address

–     Original static IP

•      Care-of address

–     Changes at each new point of attachment

–     Location specific address

•      Home agent

–     Located on home network

–     Forwards packets to appropriate network when MN is away from home network

–     Communicate with MN all the time independent of its location

–     HA must know physical location of MN

•      Foreign agent

–     When MN enters foreign network, it registers to foreign agent

–     It provides care-of address

–     Foreign agent communicates this address to home agent 

•      Step 1

–     Server X wants to transmit packet to node A

–     Home address of A is known to X

–     X does not know whether A is in home network or not

–     X sends packet to A’s home address as destination address

•      Step 2

–     Packet is intercepted by home agent

–     A is in foreign network

–     COA is allocated to A and it is available to HA

–     Packet is retransmitted

•      Step 3

–     In foreign network, the packet is intercepted by FA.

–     It delivers packet to A.

•      Step 4

–     A responds to this message to X via FA

•      Step 5

–     FA sends reply to X

111)Explain tunnelling and encapsulation. (may 2013, nov 2011)

·        When the mobile node moves, it registers its new care of address with its home agent.

·        the home agent forwards the packets to the foreign network using the care of address,

·        the delivery requires that the packet header is modified so that the care of address becomes the destination IP address,

·        this new header encapsulates the original packet, causing the mobile node’s home address to have no impact on the encapsulated packets packet’s routing. This process is called encapsulation.

·        In the mobile IP, IP within IP encapsulation mechanism is used. Using IP-within IP

·        the home agent, adds a new IP header called tunnel header.

·        The new header uses the mobile node’s care of address as the tunnel destination IP address.

·        The tunnel source IP address is the home agent’s IP address.

·        The entire original IP header is preserved as the first part of the payload of the tunnel header.

·        The foreign agent after receiving the packet, drops the tunnel header and delivers the rest to mobile node.

112)Explain the working of wimax. And differentiate wimax and wifi technology. (june 2012, dec 2012)

•      The Goal is to Provide high-speed Internet access to home and business subscribers, without wires.

•      Alternative names are as follow:

•      Wireless broadband

•      Wireless MAN

•      WLL – wireless local loop

•      WiMax- world wide interoperability for microwave access

•      Combination of voice, data and video

•      Interoperability and high data rate

•      Provides up to 10Mbps bandwidth without need of cables

•      Exterior antenna communicating with radio base stations

•      Network can be created just in few weeks by deploying small number of base stations on buildings or poles

•      Initial investment in wired system is very high

•      In wireless system, Active users are always fraction of the total subscribers

•      Wireless LANs (WiFi – IEEE 802.11)

–     infrastructure as well as ad-hoc networks

–     home/office networking

•      Wireless MANs (WiMAX-802.16)

–     Similar to cellular networks

–     traditional base station infrastructure systems

113)What are various strengths of SMS? State the application areas where these strengths can be used? (dec 2012, may 2013)

•      Omnibus nature of SMS

–     International calling functionality required

–     No such additional functionality required for SMS

•      Stateless and session less

–     No sessions or previous state info maintained

•      Asynchronous

–     No such pair of request and response or acknowledgement 

•      Self configurable and last mile problem resistant

•      Nonrepudiable

–     Msg contains SC address and MSISDN number

–     Not easy to handcraft

–     Can be identified it so

•      Always connected

114)What is difference between SM-MT and SM-MO? (june 2012)

•      Once a message is sent, it is received by a Short Message Service Center (SMSC), then it must send the msg to appropriate terminal.

•      To do this, the SMSC sends a SMS Request to (HLR) to find the roaming customer.

•      Once the HLR receives the request, it will respond to the SMSC with the subscriber's status: 1) inactive or active 2) where subscriber is roaming.

•      If the response is "inactive", then the SMSC will hold the message for a period of time.

•      When the subscriber accesses his device, the HLR sends a SMS Notification to the SMSC, and the SMSC will attempt delivery.

•      The SMSC receives verification msg, then the message is marked as "sent" and will not attempt to send again.

115  )Explain push and pull service in SMS. (nov 2011)

•      Push

–     Ex bank sending some account details to customer’s phone

–     Mobile marketing and alert msgs 

•      Pull

–     Sent from user’s mobile

–     Ex HDFC’s customer wants to know the balance then, he will send HDFCBAL to 333

–     MS -> MSC -> GMSC/ IWMSC -> SC -> SME -> Enterprise server

116)   Explain direct and indirect snooping TCP. (nov 2011,june 2012,dec 2012)

·        Problems with traditional TCP are as follow:

·        Slow start mechanism in fixed networks decreases the efficiency of TCP if used with mobile receivers or senders.

·        Error rates on wireless links are orders of magnitude higher compared to fixed fiber or copper links.

·        Mobility itself can cause packet loss. There are many situations where a soft handover from one access point to another is not possible for a mobile system

·        Standard TCP reacts with slow start if acknowledgements are missing, which does not help in the case of transmission errors over wireless links and which does not really help during handover. 

·        It Splits a TCP connection at the foreign agent into 2 TCP connections

·        The hosts in the fixed part of the network do not notice the characteristics of the   wireless part

·        No changes to the TCP protocol for hosts connected to the wired Internet, millions of computers use (variants of) this protocol

·        Optimized TCP protocol is used for mobile host

·        The access point acts as proxy in both direction

·        AP acknowledges to both the sender and receiver

·        Re-transmission on wireless links is handled locally.

·        During handover, the buffered packets, as well as the system state (packet sequence number, acknowledgements, ports, etc), must migrate the new agent.

Unit -3: General Packet Radio Service (GPRS) 

117)  Explain architecture of GPRS ( nov 2011,june 2012, may 2013)

• GPRS is a step to efficiently transport high-speed data over the current GSM infrastructures.

•      Deployment of GPRS network allows variety of new applications 

•      Uses GSM Architecture

•      To offer packet data service through GPRS, new network components are added to upgrade GSM network

•      GPRS support nodes (GSN)

–     Responsible for delivering and routing of data packets between MS and external packet data network.

•      Types of GSN

–     Gateway GSN (GGSN)

–     Serving GSN (SGSN)

SGSN

•      Same hierarchical level as MSC

•      MSC functions for voice, SGSN functions for packet data

–     Packet switching

–     Routing

–     Mobility management

–     Logical link management

–     Authentication

–     Charging

•      Registration of new mobile subscribers

•      Keeps record of their location

•      Location register of SGSN stores current cell, current VLR etc information

•      Once user is registered, SGSN sends request to HLR about user information

GGSN

•      Interface between GPRS backbone network and external PDNs.

•      Converts GPRS packets coming from the SGSN into appropriate packet format for the network

•      Receives incoming data packets from data network and convert them to GSM address of destination user

•      BSS

•      Needs enhancement to recognize and send packet data.

•      Up gradation of BTS to allow transport of user data to SGSN.

•      Up gradation of BTS to support packet data transfer between BTS and MS.

•      HLR

•      Enhancement to register GPRS user profile

•      Respond to queries originating from GSNs for these profile

•      MS

•      Mobile station must be GPRS enabled and should have hardware support

118)  Explain limitations, applications of GPRS and give difference between GPRS and GSM architecture. (may 2013, dec 2012,nov 2011)

Limitations

•      Limited cell capacity for all users

•      Low speed in reality

Applications

Difference between architecture of GSM and GPRS

GSM is basically for voice data

GPRS is for packet data

Two components are different in GPRS

            SGSN and GGSN

Explain as answer 17

Various enhancements in components of GPRS and GSM

Explained in answer 17

119)  How data routing is done in GPRS (may 2013)

·        Let as assume the home PLMN of the mobile station is PLMN 2.

·        An IP address has been assigned to the mobile by the GGSN of PLMN2.

·        Thus, the MS’s IP address has the same network prefix as the IP address of GGSN in PLMN2.

·        The correspondent host is now sending IP packets to the MS. The packets are sent out onto the IP network and are routed to the GGSN of PLMN2.

·        The later queries the HLP and obtains the information that the MS is currently located in PLMN1.

·        It encapsulates the incoming IP packets and tunnels them through the inter PLMN GPRS backbone to the appropriate SGSN in PLMN1.

·         The SGSN decapsulates the packets and delivers them to MS.

·        The HLR stores the user profile, the current SGSN address, and the PDP addresses for every GPRS user in the PLMN.

·        For example, the SGSN informs the HLR about the current location of the MS.

·        When the MS registers with a new SGSN, the HLR will send the user profile to the new SGSN.

·        The signalling path between GGSN and HLR may be used by GGSN to query a user’s location and profile in order to update its location register. 

Unit -4: Wireless Application protocol, MMS, CDMA and 3G 

220) Explain frequency hopping and direct hopping spread spectrum technology. (nov 2011,dec 2012, may 2013)

•      Communication technique that spreads a narrowband communication signal over a wide range of frequencies for transmission then de-spreads it into the original data bandwidth at the receive

•      The signal occupies a bandwidth much larger than is needed for the information signal.

•      The spread spectrum modulation is done using a spreading code, which is independent of the data in the signal

•      Dispreading at the receiver is done by correlating the received signal with a synchronized copy of the spreading code.

•      Input is fed into a channel encoder

–     Produce an analog signal with a relatively narrow bandwidth around some center frequency

•      Further modulated using a sequence of digits known as a spreading code or spreading sequence

–     The spreading code is generated by a pseudonoise, or pseudorandom number generator

–     The effect of this modulation is to increase the bandwidth of the signal to be transmitted

•      At the receiver, the same digit sequence is used to demodulate the spread spectrum signal

•      The signal is fed into a channel decoder to recover the data.

Frequency hopping

•      Signal is transmitted, hopping from frequency to frequency at fixed intervals

•      A receiver, hopping between frequencies in synchronization with the transmitter, picks up the message

221)  Differentiate CDMA and GSM (may 2013,june 2012)

CDMA	GSM
Code Division Multiple Access	Global System for Mobile communication
Storage type : internal memory	SIM memory
Global market share : 25%	75%
Dominant standard in the U.S.	Dominant standard worldwide except the U.S.
There is one physical channel and a special code for every device in the coverage network. Using this code, the signal of the device is multiplexed, and the same physical channel is used to send the signal	Every cell has a corresponding network tower, which serves the mobile phones in that cellular area.
Less Accessible	Most Accessible
Frequency band : Single(850 MHz)	Multiple(850/900/1800/1900 MHz)
Handset specific	SIM specific. User has option to select handset of his choice.
Emits less radiation	Emits 28 times more radiations than CDMA

222) State requirement of WAP and explain different layers of WAP(protocol stack of WAP). (nov 2011, dec 2012, may 2013)

•      WAP is designed for accessing Internet and Advanced telephony services from mobile phone

•      Consider the constraints like small display, limited keys on keypad, no pointing device as mouse, limited memory, limited user-input functionality, etc.

•      Using WAP,  user can access the same wealth of information from pocket device too.

•      Application layer (WAE)

Following components

•      User agent – browser or client program

•      User agent – working on behalf of user

•      Browsers

•      Gateway does encoding and decoding of data to minimize its size over the network

•      Process the request, retrieves content from the server

•      Data is converted into WML form and returned to client

•      Wireless markup language (WML)

•      Tag based document manipulation language.

•      Quite resembling to HTML

•      Can be used to display static pages and contents fetched by CGI, JSP or ASP

•      The support is not as wide as that of HTML

•      WML Script – lightweight client side scripting language, similar to java script

•      Extended subset of JavaScript

•      Adds intelligence to client  and enhance user interface

•      Provides ability to do local validations of user input

•      Ability to access device resources, functions and peripherals

•      Ability to interact with user without reference to the origin server

•      Wireless Telephony Application

•      Creates telephony applications

•      WTAI libraries provide following functionalities

•      Voice call control

•      Network text integration

•      Phonebook manipulations

•      Call logs access

•      WAP Push services

•      Push 

•      Server initiated

•      Sending information to client without being request for it

•      Pull

•      Client initiated

•      Sending information to server to pull some information from server 

•      Content format – formats for data, images, calendar records, phone book, etc.

•      Wireless Session Protocol (WSP)

•      Establishes a reliable session from client to server

•      Closes it in orderly manner

•      Exchange content between client and server using compact encoding

•      Suspend and resume the session

•      Designed to function between WAE and WTP

•      Wireless Transaction Protocol(WTP)

•      Provides light weight transaction oriented protocol suitable for clients

•      Each new transaction has a new Transaction ID (seq no.)

•      Supports three transactions as following

•      Unreliable one way request

•      Sender sends a message but does not wait for an ack

•      Receiver delivers message to application w/o checking for duplicates

•      No acks are sent

•      Sample app: unreliable weather update (push)

•      Reliable one way request

•      Sender sends a message and waits for an ack

•      Receiver checks for duplicates before delivering message to application

•      Acks are sent and retransmitted if error occurred

•      Reliable two way request – reply transaction

•      Sender sends a message and waits for an ack

•      Receiver checks for duplicates before delivering message to application

•      Ack for request is piggy-backed on top of the reply from the server application

•      Client acks the receipt of the result

•      Wireless Transport Layer Security(WTLS)

•      Security protocol based on transport layer security (TLS) and secure socket layer (SSL)

•      Functionalities

•      Data integrity

•      Privacy

•      Authentication

•      Denial of service protection

•      Wireless Data Protocol (WDP)

•      Allows transport, security, and session protocols to operate independent of the underlying bearer (e.g. GSM, CDMA, etc.)

•      Segmentation/Reassembly: only present if underlying bearer does not support it already

•      Provides common interface to upper layer protocols to they can function independently irrespective of underlying bearer. 

223)  What is VoIP? Explain its architecture. Compare and explain both H.323 and SIP. (nov 2011, june 2012, may 2013)

Voice over Internet Protocol, is a method for taking analog audio signals, like the kind you hear when you talk on the phone, and turning them into digital data that can be transmitted over the Internet.  VoIP can turn a standard Internet connection into a way to place free phone calls. The practical upshot of this is that by using some of the free VoIP software that is available to make Internet phone calls, you're bypassing the phone company (and its charges) entirely.

VoIP has many protocols to choose from for every type of signalling involved. For example, Device Control Protocols like H.248 (more popularly known as Megaco), Media Gateway Control Protocol (MGCP), NCP, Real-time Transport Protocol (RTP); Access Service Signalling protocols like Session Initiation Protocol (SIP) and H.323; Network Service Signalling Protocols like SIP, SIP-T, CMSS, BICC etc. The most popular among these are Megaco and RTP for Device Control and SIP for Signalling. Proprietary software like Skype use P2P based protocols.

The main components of the contemporary VoIP systems are as highlighted below.

Call Agent/ SIP Server: It is located in the service provider’s network for call logic and control functions. It maintains call states for every call in the network. Additional functionalities like Caller ID etc. can be added and the call details necessary for billing are also provided by the same. A SIP server is similar to Call Agent, in a SIP based networks and routes the SIP requests. A SIP Client is the terminating or originating SIP server rather than the forwarding server. It can convert MGCP or H.248 protocols for call setup. These are also termed as Media Gateway Controllers, softswitches and call controllers depending on the network topology and features used.

Service Broker: Placed on the edge of the service provider’s network, it is responsible for service distribution, control and coordination between application servers, media servers and call agents.

Application Server: It provides service logic and execution for one or more applications which are otherwise not hosted on the call agents like Voice Mail etc.

Media Server: Often referred to as Announcement server, it is responsible for playing announcements, codec transcoding, tone generation and detection, IVR etc.

Signalling Gateway: It is the gateway between the call agent signalling like SIP and SS7 based PSTN networks or between different packets based carrier domains allowing communication between various service providers.

Trunking Gateway: Gateway between IP networks working on H.248 or MGCP protocols and TDM based PSTN for transcoding of packet based voice into TDM networks.

Access Gateway and Subscriber Gateway: These are meant for providing compatibility support for POTS (Plain old telephone system). The difference between the two is the capacity the two can handle with the latter offering support for very few subscribers.

Access Concentrator: These act as terminations for service providers over WAN links like DSLAMs for DSL links and CMTS in Cable networks.

Bandwidth Manager: Caters to providing and maintaining the required QoS pre user on a per call basis.

Edge Routers: These are responsible for routing traffic onto the carrier backbone network.

24)           24)  Explain advantages and disadvantages of WLAN. Explain the design goals and security measures for wireless LAN (dec 2012,nov 2011)

Advantages of WLAN are as follow:

Mobility

Mobility is a significant advantage of WLANs. User can access shared resources without looking for a place to plug in, anywhere in the organization. A wireless network allows users to be truly mobile as long as the mobile terminal is under the network coverage area.

Range of coverage

The distance over which RF and IR waves can communicate depends on product design (including transmitted power and receiver design) and the propagation path, especially in indoor environments. Interactions with typical building objects, such as walls, metal, and even people, can affect the propagation of energy, and thus also the range and coverage of the system. IR is blocked by solid objects, which provides additional limitations. Most wireless LAN systems use RF, because radio waves can penetrate many indoor walls and surfaces. The range of a typical WLAN node is about 100 m. Coverage can be extended, and true freedom of mobility achieved via roaming. This means using access points to cover an area in such a way that their coverages overlap each other. Thereby the user can wander around and move from the coverage area of one access point to another without even knowing he has, and at the same time seamlessy maintain the connection between his node and an access point.

Ease of use

WLAN is easy to use and the users need very little new information to take advantage of WLANs. Because the WLAN is transparent to a user's network operating system, applications work in the same way as they do in wired LANs.

Installation Speed, Simplicity and Flexibility

Installation of a WLAN system can be fast and easy and can eliminate the need to pull cable through walls and ceilings. Furthermore, wireless LAN enables networks to be set up where wires might be impossible to install.

Scalability

Wireless networks can be designed to be extremely simple or complex. Wireless networks can support large numbers of nodes and large physical areas by adding access points to extend coverage.

Cost

Finally, the cost of installing and maintaining a WLAN is on average lower than the cost of installing and maintaining a traditional wired LAN, for two reasons. First, WLAN eliminates the direct costs of cabling and the labor associated with installing and repairing it. Second, because WLANs simplify moving, additions, and changes, the indirect costs of user downtime and administrative overhead are reduced.

Disadvantages 

• As the number of computers using the network increases, the data transfer rate to each computer will decrease accordingly.
• As standards change, it may be necessary to replace wireless cards and/or access points.
• Lower wireless bandwidth means some applications such as video streaming will be more effective on a wired LAN.
• Security is more difficult to guarantee and requires configuration.
• Devices will only operate at a limited distance from an access point, with the distance determined by the standard used and buildings and other obstacles between the access point and the user.
• A wired LAN is most likely to be required to provide a backbone to the WLAN; a WLAN should be a supplement to a wired LAN and not a complete solution.
• Long-term cost benefits are harder to achieve in static environments that require few moves and changes.
• Security issues and measures

·         Basic 802.11 security deters accidental association or casual eavesdropping. In most WLAN products, however, these security features are disabled by default. Disabled means the WLAN operates in "open system" mode--any station can join because they know the network's Service Set Identifier (SSID) or by capturing beacon frames broadcast by APs.

·         The 802.11 standard's security is composed of authentication and encryption. When shared-key authentication is enabled, stations can associate with the AP only if they have a 40- or 128-bit key known to both parties. When Wired Equivalent Privacy (WEP) is enabled, the same key is fed into the RC4 cipher to encrypt data frames. Only stations that possess the shared key can join the WLAN, but the same key decrypts frames transmitted by other stations. If your policy requires authentication of individual stations, or confidentiality beyond the air link, you must adopt other measures.

·         Configuring a hard-to-guess SSID makes neighbors less likely to mistake your WLAN for their own. Stations running Windows XP automatically join any discovered network by default. Enabling shared-key authentication prevents this. Using WEP is like locking your office desk. Motivated intruders can jimmy a low-grade lock. Given enough data, a persistent attacker can use freeware tools to crack WEP. Nevertheless, these can be your first line of defense. Small business and home networks should always use them; enterprises may opt for higher-level measures. The 802.1X standard addresses the need for more robust authentication, and the 802.11i standard's Temporal Key Integrity Protocol (TKIP) provides for more robust encryption

25)             

a.                  Compare wifi and 3G technology. (nov 2011,may 2013)

Refer previous answers for the description

b.                  Compare wifi and wimax technology( dec 2012)

Wimax is a criterion based wireless technology which is used to provide internet access and multimedia services at very high speed to the end user while Wi-Fi technology uses local area network (LAN) for internet access. Wimax covers a greater distance than Wi-Fi thus can cover a metropolitan area network. wifi is faster but much lower range - a few hundred feet at most. Wimax is slower still faster than broadband.

Wi-Fi works at 2.7 bps/Hz and can peak up to 54 Mbps in 20 MHz channel. WiMAX works at 5 bps/Hz and can peak up to 100 Mbps in a 20 MHz channel.